🚀 TYPING EXCELLENCE

AIIMS CRE-5 2026 Typing Test: Posts, Speed, Error Rules, Penalty & Net WPM

AIIMS Common Recruitment Examination (CRE-5) 2026 includes several posts where candidates have to qualify a computer typing, data-entry, or stenography/transcription skill test. For candidates preparing specifically for these tests, understanding the official mistake rules and net-speed calculation is just as important as improving typing speed.

This is where TypingSathi becomes useful. Instead of practising with a generic typing calculator, candidates can prepare around the CRE-5-specific 5-stroke word standard, full/half mistake system, 50-stroke penalty and net WPM calculation prescribed in the notification.

This guide covers only the typing, data-entry and stenography-related parts of the AIIMS CRE-5 2026 notification.


Which AIIMS CRE-5 Posts Have a Typing or Skill Test?

The notification identifies the following groups relevant to typing candidates:

GroupPostsSkill TestTyping Requirement
Group 3Data Entry Operator Grade A, Junior Administrative Assistant, LDC, UDC / Senior Administrative AssistantTyping / Data Entry Skill TestDEO: 8,000 KDPH; JAA/LDC/UDC: 35 WPM English / 30 WPM Hindi
Group 19Coding Clerk, Junior Medical Record Officer, Medical Record TechnicianTyping Skill Test35 WPM English / 30 WPM Hindi
Group 20Stenographer, Personal Assistant, Private SecretaryStenography + Computer TranscriptionSteno: 80 WPM, PA: 100 WPM, Private Secretary: 120 WPM
Group 2Junior Administrative Officer, Assistant Administrative Officer, Office Assistant, AssistantComputer-based Skill TestKeyboard-based writing, but not a conventional WPM typing test

Group 3 and Group 19 are the main conventional typing-test categories, while Group 20 is a separate stenography/transcription test. 


AIIMS CRE-5 Group 3 Typing Test

Group 3 covers:

Data Entry Operator Grade A / Junior Administrative Assistant / Lower Division Clerk / Upper Division Clerk

The official skill-test standard is as follows:

PostLanguageTest DurationQualifying Standard
Data Entry Operator Grade AEnglish15 minutes2,000 key depressions in 15 min
JAA / LDCEnglish15 minutes35 WPM
JAA / LDCHindi15 minutes30 WPM
Senior Administrative Assistant / UDCEnglish15 minutes35 WPM
Senior Administrative Assistant / UDCHindi15 minutes30 WPM

For DEO Grade A, 2,000 key depressions in 15 minutes corresponds to 8,000 KDPH. For JAA/LDC/UDC, the prescribed qualifying speed is 35 WPM English or 30 WPM Hindi. 

Educational standard

For example, the notification specifies 12th class/equivalent for several JAA/LDC posts along with the typing requirement. Individual vacancy entries also specify the corresponding typing standard for the particular institute/post. 

For Data Entry Operator Grade A, the requirement is 12th standard/equivalent plus a speed of at least 8,000 key depressions per hour


AIIMS CRE-5 Group 19 Typing Test

Group 19 includes:

Coding Clerk / Junior Medical Record Officer / Medical Record Technician

ParameterRequirement
TestTyping Skill Test
NatureQualifying only
Duration15 minutes
English35 WPM
Hindi30 WPM
English KeyboardConventional QWERTY
HindiMangal
Other Hindi fonts/keyboardsNot provided
BackspaceAllowed

The Group 19 posts have additional Medical Records qualifications, experience and computer requirements, but the typing component remains 35 WPM English / 30 WPM Hindi


AIIMS CRE-5 Group 20: Stenographer, PA & Private Secretary

Group 20 is different from the normal typing test because candidates first have dictation and then computer transcription.

PostDictationTranscription – EnglishTranscription – Hindi
Stenographer80 WPM × 10 min50 min65 min
Personal Assistant100 WPM × 10 min40 min55 min
Private Secretary120 WPM × 7 min45 min60 min

For English transcription, a QWERTY keyboard is provided. For Hindi, the prescribed system is Mangal, with no provision for another keyboard/font. 

Some individual ICMR Personal Assistant vacancies additionally mention 120 WPM shorthand as part of their post-specific qualification. Candidates should therefore check the specific vacancy they are applying for rather than assuming every PA entry has identical eligibility. 


The Most Important Part: How AIIMS CRE-5 Counts Typing Errors

AIIMS CRE-5 does not simply count every wrong character as one mistake.

The official evaluation system divides errors into:

Full Mistakes and Half Mistakes.

Full Mistakes

ErrorPenalty classification
Omission of a word/figure1 Full Mistake
Substitution of a wrong word/figure1 Full Mistake
Absurd/meaningless input1 Full Mistake
Addition of a wrong word/figure1 Full Mistake
Repetition of a word/figure1 Full Mistake
Spelling error involving letters/matras1 Full Mistake

Example

Master passage:

Online Advertising is an art.

Candidate types:

Online Advertising is art.

The omission of “an” is counted as one full mistake. A wrong substitution or addition of a word is also a full mistake. 


Half Mistakes

ErrorClassification
Missing space½
Extra space½
Punctuation error½
Paragraph/indent-related error½
Wrong capitalization½

Wrong capitalization is not applicable to Hindi typing. 

The notification also specifies that extra spacing resulting from text justification is not counted. 


Important CRE-5 Typing Error Rules

There are several rules that candidates must understand before attempting a mock.

RuleCRE-5 treatment
Multiple errors in one wordMaximum 1 Full Mistake
BackspaceAllowed
Hindi alternate spelling due to font/keyboard formationCertain grammatically correct alternatives are exempted
Extra spacing caused by justificationNot counted
Single space after full stop in EnglishAllowed
Insufficient gross inputMistakes are not checked; result marked Insufficient Attempt

The notification explicitly limits multiple errors in one word to a maximum of one full mistake. 


How Total Mistakes Are Calculated

This is the official formula:Total Mistakes=Full Mistakes+Half Mistakes2

Example

Suppose a candidate has:

  • Full Mistakes = 4
  • Half Mistakes = 7

Then:4+72=7.5

Total Mistakes = 7.5

There is no rounding off.

So 7.5 remains 7.5, not 7 or 8. 


AIIMS CRE-5 Penalty Calculation

AIIMS uses:5 strokes=1 word

and:1 Full Mistake=50 penalty strokes

Therefore:Penalty Strokes=Total Mistakes×50

Example

If:

  • Full Mistakes = 10
  • Half Mistakes = 4

Then:Total Mistakes=10+42=12Penalty=12×50=600

So the candidate receives a 600-stroke penalty


Gross WPM vs Net WPM

This is one of the biggest differences between ordinary typing websites and an exam-oriented calculation.

Gross WPM

Gross WPM represents the typing speed before the official mistake penalty.Gross WPM=Total Strokes5×Time in Minutes

Net WPM

Net WPM is calculated after deducting the official penalty strokes.Net WPM=Total Strokes−Penalty5×Time in Minutes

Since:Penalty=Total Mistakes×50

we can write:Net WPM=Total Strokes−(Total Mistakes×50)5×Time

The notification's own example uses 3,000 strokes − 1,000 penalty = 2,000, resulting in 40 WPM for a 10-minute test. 


Example: Calculate CRE-5 Net WPM

Suppose a candidate attempts a 15-minute typing test.

ParameterValue
Total strokes3,000
Full mistakes10
Half mistakes4
Total mistakes12
Penalty600 strokes
Net strokes2,400

Step 1 — Total mistakes

10+42=12

Step 2 — Penalty

12×50=600

Step 3 — Net strokes

3000−600=2400

Step 4 — Net WPM

24005×15=240075=32 WPM

The candidate's Net WPM = 32, so this result would fall below a 35 WPM qualifying requirement.


AIIMS CRE-5 Accuracy Formula

The notification also provides an accuracy calculation:Accuracy=Net Typing SpeedGross Typing Speed×100

For example, if:

  • Gross WPM = 50
  • Net WPM = 40

then:4050×100=80%

This is the accuracy method specifically stated in the CRE-5 skill-test guidelines. 


Minimum Attempt Requirement

AIIMS has also specified a minimum gross input requirement. When the candidate does not enter enough material, the authority says the mistakes should not be checked and the result should show “Insufficient Attempt.”

TestMinimum input
35 WPM / 10 min1,750 strokes
35 WPM / 5 min875 strokes
8,000 KDPH / 15 min2,000 strokes
8,000 KDPH / 10 min1,333 strokes
8,000 KDPH / 5 min667 strokes

This means an exam-simulation platform should check minimum attempt first, before applying the mistake engine.


Why TypingSathi Is the Best Choice for AIIMS CRE-5 Typing Preparation

Most generic typing websites focus primarily on gross typing speed. AIIMS CRE-5 requires much more than that.

TypingSathi is designed around the actual exam-style calculation, making practice more relevant for CRE-5 candidates.

1. Practice the actual 35/30 WPM target

Candidates preparing for JAA, LDC, UDC and Group 19 posts can practise against the exact 35 WPM English / 30 WPM Hindi qualifying standard.

2. Separate Gross WPM and Net WPM

A candidate may type at 45–50 WPM but still fall below the required qualifying speed after mistakes.

TypingSathi focuses on the number that matters:Net WPM

3. CRE-5-specific mistake calculation

TypingSathi can follow the official structure of:FM+HM2

instead of treating every error identically.

4. Correct 50-stroke penalty

The CRE-5 system uses:50 strokes per Full Mistake

This is the penalty structure candidates should practise with. 

5. English and Hindi preparation

CRE-5 allows the applicable typing tests in English or Hindi, with Hindi typing using the prescribed Mangal setup. 

6. Exam-specific error awareness

TypingSathi-style practice should train candidates to avoid precisely those errors that CRE-5 penalizes: spelling, omission, substitution, addition, spacing, punctuation and capitalization errors.


CRE-5 Typing Preparation at a Glance

CategoryRequirement
Group 3 DEO8,000 KDPH
Group 3 JAA/LDC/UDC35 WPM English / 30 WPM Hindi
Group 1935 WPM English / 30 WPM Hindi
Normal typing test duration15 minutes
Word standard5 strokes = 1 word
Full mistake1
Half mistake0.5
Total mistakesFM + HM/2
Penalty50 strokes per full-mistake unit
Net WPM(Strokes − Penalty) ÷ (5 × minutes)
AccuracyNet WPM ÷ Gross WPM × 100
BackspaceAllowed
English keyboardQWERTY
Hindi keyboard/fontMangal / prescribed setup
Insufficient attemptMistakes not checked

The core typing evaluation methodology, including the five-stroke word standard, mistake calculation, penalty, speed and accuracy formulas, is specified in Annexure-V of the CRE-5 advertisement. 


Prepare for AIIMS CRE-5 With TypingSathi

Don't practise only for speed. Practise for the score that the exam actually produces.

For CRE-5 typing tests, your final performance depends on:Speed+Accuracy+Error Control+Official Penalty

A candidate who understands the 35/30 WPM target, full and half mistakes, 50-stroke penalty, minimum attempt and net-WPM calculation can prepare much more effectively than someone relying only on a normal typing-speed test.

TypingSathi brings these CRE-5-specific rules into your daily practice so that your preparation is focused on the way the exam evaluates typing.

Source: AIIMS CRE-5 Detailed Recruitment Advertisement, Notice No. 93/2026 dated 13 June 2026.

For applicable JAA, LDC and UDC posts, the qualifying typing speed is 35 WPM in English or 30 WPM in Hindi on a computer. For Data Entry Operator Grade A, the requirement is 8,000 key depressions per hour.

AIIMS CRE-5 calculates net WPM after deducting the typing penalty. The formula is: Net WPM = (Total Strokes − Penalty Strokes) ÷ (5 × Test Duration in Minutes). One full mistake carries a penalty of 50 strokes.

Total mistakes are calculated as Full Mistakes + Half Mistakes ÷ 2. A full mistake includes word omission, substitution, addition/repetition and specified spelling errors, while spacing, punctuation and capitalization errors are treated as half mistakes.

The official standard uses 5 strokes as one word and imposes a penalty of 50 strokes for every full-mistake unit. Half mistakes are first converted into the total mistake count and then the 50-stroke penalty is applied.

Yes. Group 20 includes Stenographer, Personal Assistant and Private Secretary posts. Their dictation requirements are 80 WPM, 100 WPM and 120 WPM respectively, followed by computer transcription within the prescribed time.

TypingSathi

Type faster. Rank Higher. Crack every Govt Exam
(SSC, Railway & State Govt Exams)

  • Experience the Real Exam Interface
  • Authentic Typing Sound Effects
  • ⁠Live Speed & Accuracy Tracking
  • Precise Error Counting- Half & Full Error
Try It Now (for free)

Contact Us

Fill out our contact form, and we’ll get back to you as soon as possible!

    Keep in touch with us

    Have questions? Need support? We’re here to help!

    Name: TypingSathi Administrator
    ×
    and and paste it just before the closing tag of your website. 3. For WordPress: use a plugin like "WPCode" or "Insert Headers and Footers" and paste this into the "Footer" section. -->
    📢 Live Updates
    TypingSathi Logo

    TypingSathi Updates

    Join our official channels for everything you need to ace your typing exam.

    📝 Exam Alerts 📋 Exam Rules 🎯 Daily Targets 🎁 Offers